Exhibitors + Products

Minimum 3 characters.

Search by product group(s)

Sensors
- S.01 Sensors and sensing elements by measured parameter
  - S.01.01 Geometric parameters
    - S.01.01.01 Angle, inclination, orientation
    - S.01.01.02 Position (3D), direction, inertial systems
    - S.01.01.03 Length, displacement – range < 0.01 m
    - S.01.01.04 Length, displacement – range < 0.5 m
    - S.01.01.05 Length, displacement – range ≥ 0.5 m
    - S.01.01.06 Gap, distance, sag – range < 0.01 m
    - S.01.01.07 Gap, distance, sag – range ≥ 0.01 m
    - S.01.01.08 Position (2D/3D)
    - S.01.01.09 Position (piston)
    - S.01.01.10 Contour (2D/3D)
    - S.01.01.11 Topography
    - S.01.01.12 Roughness, coarseness
    - S.01.01.13 Internal 3D structure
    - S.01.01.14 Level – measuring error < 0.5 %
    - S.01.01.15 Level – measuring error ≥ 0.5 %
    - S.01.01.16 Float Switch
    - S.01.01.17 Edge Detection
    - S.01.01.18 Particle size
    - S.01.01.19 Volume
    - S.01.01.20 Thickness
    - S.01.01.21 Coating thickness
    - S.01.01.22 Diameter
    - S.01.01.23 Gap width
    - S.01.01.24 Presence
    - S.01.01.25 Proximity switch
    - S.01.01.26 Photoelectric switch
    - S.01.01.27 Contact switch
    - S.01.01.28 Limit switch, position switch
    - S.01.01.29 Magnetic switch, general
    - S.01.01.30 Magnetic switch, cog sensor
    - S.01.01.31 Further geometric parameters
  - S.01.02 Mechanical parameters
    - S.01.02.01 Force, load
    - S.01.02.02 Mass, weight, dosage
    - S.01.02.03 Stress, strain, elongation
    - S.01.02.04 Pressure, absolute
    - S.01.02.05 Pressure (gauge) – measuring error < 0.1 %
    - S.01.02.06 Pressure (gauge) – measuring error ≥ 0.1 %
    - S.01.02.07 Fine vacuum < 1 mbar
    - S.01.02.08 Extreme pressure > 1000 bar
    - S.01.02.09 Differential pressure – measuring error < 0.1 %
    - S.01.02.10 Differential pressure – measuring error > 0.1 %
    - S.01.02.11 Pressure drop, leakage
    - S.01.02.12 Density
    - S.01.02.13 Friction
    - S.01.02.14 Viscosity
    - S.01.02.15 Hardness, elasticity
    - S.01.02.16 Surface tension
    - S.01.02.17 Mechanical work
    - S.01.02.18 Mechanical power
    - S.01.02.19 Torque
    - S.01.02.20 Moment of torsion, reaction moment
    - S.01.02.21 Further mechanical parameters
  - S.01.03 Dynamic parameters
    - S.01.03.01 Time, duration
    - S.01.03.02 Wavelength, frequency
    - S.01.03.03 Oscillation, amplitude, vibration speed
    - S.01.03.04 Vibration damping
    - S.01.03.05 Rotary oscillation, torsional oscillation
    - S.01.03.06 Vibration switch
    - S.01.03.07 Motion
    - S.01.03.08 Pulse counting, event counting
    - S.01.03.09 Rotational speed (r.p.m)
    - S.01.03.10 Angular momentum
    - S.01.03.11 Rotational direction
    - S.01.03.12 Angular velocity, rotational velocity
    - S.01.03.13 Angular velocity, rotational acceleration
    - S.01.03.14 Acceleration, shock
    - S.01.03.15 Velocity, linear
    - S.01.03.16 Flow
    - S.01.03.17 Mass flow
    - S.01.03.18 Volume flow in gases
    - S.01.03.19 Volume flow in liquids
    - S.01.03.20 Flow velocity
    - S.01.03.21 Radioactivity
    - S.01.03.22 Particle count
    - S.01.03.23 Further dynamic parameters
  - S.01.04 Thermal and caloric parameters
    - S.01.04.01 Temperature, with contact
    - S.01.04.02 Temperature, contactless
    - S.01.04.03 Temperature distribution
    - S.01.04.04 Heat quantity, heat consumption
    - S.01.04.05 Calorific value, heating value, thermal energy, Wobbe index
    - S.01.04.06 Heat flow, thermal power
    - S.01.04.07 Calorific value, heating value, thermal energy, Wobbe index
    - S.01.04.08 Enthalpy
    - S.01.04.09 Further thermal and caloric parameters
  - S.01.05 Atmospheric and meteorological parameters
    - S.01.05.01 Humidity, relative (gas humidity)
    - S.01.05.02 Humidity, absolute (gas humidity), dew point
    - S.01.05.03 Material humidity
    - S.01.05.04 Evaporation, precipitation
    - S.01.05.05 Room climate
    - S.01.05.06 Dust, particle density, soot density
    - S.01.05.07 Immission, emission
    - S.01.05.08 Smoke
    - S.01.05.09 Wind velocity
    - S.01.05.10 Wind direction
    - S.01.05.11 Barometric pressure, air pressure
    - S.01.05.12 Rain Detector
    - S.01.05.13 Wind chill temperature
    - S.01.05.14 Solar radiation (UV, FIR, VIS)
    - S.01.05.15 Sunshine period
    - S.01.05.16 Geomagnetic field, compass
    - S.01.05.17 Lightning
    - S.01.05.18 Further atmospheric and meteorological parameters
  - S.01.06 Optical parameters
    - S.01.06.01 Light intensity, illumination intensity
    - S.01.06.02 Photon counters
    - S.01.06.03 Fiber-optic sensor
    - S.01.06.04 Radiation, radiated energy, density
    - S.01.06.05 Opacity, absorption, transmission
    - S.01.06.06 Optical attenuation
    - S.01.06.07 Scattered light absorption
    - S.01.06.08 Refraction
    - S.01.06.09 Reflection, diffuse reflection, brightness
    - S.01.06.10 Fluorescence
    - S.01.06.11 Optical density
    - S.01.06.12 Barcode
    - S.01.06.13 Colorimetry
    - S.01.06.14 Spectral distribution
    - S.01.06.15 Infrared, IR measurement
    - S.01.06.16 UV measurement
    - S.01.06.17 Image sensor
    - S.01.06.18 X-ray absorption
    - S.01.06.19 Contrast
    - S.01.06.20 Further optical parameters
  - S.01.07 Acoustic parameters
    - S.01.07.01 Sound, acoustic
    - S.01.07.02 Conducted sound
    - S.01.07.03 Acoustic attenuation, damping
    - S.01.07.04 Loudness
    - S.01.07.05 Ultrasound
    - S.01.07.06 Acoustic cavitation
    - S.01.07.07 Further acoustic parameters
  - S.01.08 Electrical parameters
    - S.01.08.01 Electrical voltage
    - S.01.08.02 Electrical current, with contact
    - S.01.08.03 Electrical current, contactless
    - S.01.08.04 Electrical charge, capacity
    - S.01.08.05 Electrical fieldstrength, magnetic fieldstrength
    - S.01.08.06 Magnetic flux density
    - S.01.08.07 Electrical conductivity
    - S.01.08.08 Electrical resistance
    - S.01.08.09 Inductance
    - S.01.08.10 Eddy Current
    - S.01.08.11 cos φ
    - S.01.08.12 Electrical energy
    - S.01.08.13 Electrical power
    - S.01.08.14 Radar transceiver
    - S.01.08.15 Further electrical parameters
  - S.01.09 Chemical, biological and medical parameters
    - S.01.09.01 Electrochemical conductivity
    - S.01.09.02 Redox potential
    - S.01.09.03 Oxygen, dissolved
    - S.01.09.04 Dissolved chlorine
    - S.01.09.05 Ion-selective sensors, e.g. Na+, Cl-
    - S.01.09.06 Mass spectrometer
    - S.01.09.07 Gas chromatograph
    - S.01.09.08 Concentration in liquids
    - S.01.09.09 pH value
    - S.01.09.10 Water content in oil
    - S.01.09.11 Oil content in water
    - S.01.09.12 Gas bubbles in liquids
    - S.01.09.13 Air demand
    - S.01.09.14 Blood pressure, invasive
    - S.01.09.15 Blood pressure, non-invasive
    - S.01.09.16 Blood flow
    - S.01.09.17 Pulse rate
    - S.01.09.18 Pulse oximetry, SpO2
    - S.01.09.19 Body temperature
    - S.01.09.20 Electrical body currents (medical applications)
    - S.01.09.21 Glucose
    - S.01.09.22 Lactate
    - S.01.09.23 Further chemical, biological and medical parameters
    - S.01.09.24 Metabolites
  - S.01.10 Gas sensors, gas concentration
    - S.01.10.01 Hydrogen, H
    - S.01.10.02 Oxygen O, gaseous
    - S.01.10.03 Ozone, O3
    - S.01.10.04 Chlorine, gaseous, Cl
    - S.01.10.05 Nitrogen, N
    - S.01.10.06 Carbon monoxide, CO
    - S.01.10.07 Carbon dioxide, CO2
    - S.01.10.08 Nitrous oxides NOx
    - S.01.10.09 Hydrogen sulphide, H2S
    - S.01.10.10 Sulphur dioxide, SO2
    - S.01.10.11 Ammonia, NH3
    - S.01.10.12 Methane, CH4, natural gas, biogas
    - S.01.10.13 N-butane, C4H10
    - S.01.10.14 Propane, C3H8
    - S.01.10.15 Acetylene, C2H2
    - S.01.10.16 Ethylene, C2H4
    - S.01.10.17 Chlorinated hydrocarbons, CHC
    - S.01.10.18 Chlorofluorocarbon, CFC
    - S.01.10.19 Cyclic hydrocarbons
    - S.01.10.20 Hydrofluorocarbons, HFC
    - S.01.10.21 Sulfur hexafluoride, SF6
    - S.01.10.22 Dioxin
    - S.01.10.23 Xenon, Xe
    - S.01.10.24 Helium, He
    - S.01.10.25 Refrigerants
    - S.01.10.26 Multi gas analyzer (electronic nose)
    - S.01.10.27 Flame sensor
    - S.01.10.28 Combustible (flammable) gases
    - S.01.10.29 Hydrochloric acid, HCl
    - S.01.10.30 Laughing gas, nitrous oxide, N2O
    - S.01.10.31 Further gas sensors, gas concentration
    - S.01.10.32 Volatile organic compound, VOC
    - S.01.10.33 Methane number
    - S.01.10.34 Pesticide
    - S.01.10.35 Alcohol, e.g. Ethanol, Methanol, Propanol, etc.
    - S.01.10.36 Formaldehyde
  - S.01.11 Further measured parameters
    - S.01.11.01 Lubrication status
    - S.01.11.02 Axial thrust
    - S.01.11.03 Cage speed
    - S.01.11.04 Contact angle
    - S.01.11.05 Further measured parameters
- S.02 Sensors and sensing elements by measurement principle
  - S.02.01 Strain gauge
  - S.02.02 Semiconductor strain gauges, piezoresistive
  - S.02.03 Resistive sensor element
  - S.02.04 Piezoresistive sensing element
  - S.02.05 Thin film measuring cell
  - S.02.06 Thick film measuring cell
  - S.02.07 Thermoresistor
  - S.02.08 Measurement potentiometer
  - S.02.09 Inductive sensing element
  - S.02.10 Capacitive sensing element
  - S.02.11 Piezoelectric sensing element
  - S.02.12 Magneto-resistive sensing element
  - S.02.13 Magnetostrictive sensor element
  - S.02.14 Hall sensing element
  - S.02.15 Hall angle sensor
  - S.02.16 Hall switch
  - S.02.17 Hall IC
  - S.02.18 Light barrier
  - S.02.19 Light curtain
  - S.02.20 Pyroelectric sensing element
  - S.02.21 Thermocouple
  - S.02.22 Thermocouple equalization lead
  - S.02.23 Photo cell, photo sensor
  - S.02.24 Fibre-optic sensor
  - S.02.25 Optoelectronic element
  - S.02.26 Optical interferometer or interference sensing element
  - S.02.27 UV measuring cell
  - S.02.28 Infrared, IR measuring cell
  - S.02.29 Laser measuring cell
  - S.02.30 Radar measuring cell
  - S.02.31 Ultrasound measuring cell
  - S.02.32 Solid state electrolyte
  - S.02.33 Semiconductor gas sensing element
  - S.02.34 Semiconductor temperature sensing element
  - S.02.35 ISFET sensor element
  - S.02.36 Laminar flow element
  - S.02.37 Thermopile
  - S.02.38 Organic semiconductor sensor
  - S.02.39 Emitter receiver array
  - S.02.40 CCD system, CMOS system
  - S.02.41 Microswitch
  - S.02.42 Electro-optical rotary encoder
  - S.02.43 Electrochemical gas sensor
  - S.02.44 Heat tone sensor
  - S.02.45 SAW sensor
  - S.02.46 Ion-selective electrode
  - S.02.47 Further sensors and sensing elements
  - S.02.48 Nondispersive infrared sensor (NDIR sensor)
- S.03 Sensor components and accessories
  - S.03.01 Special material
  - S.03.02 Semi-finished part for sensors
  - S.03.03 Wafer, polished
  - S.03.04 Ceramic raw material
  - S.03.05 Ceramic component
  - S.03.06 Piezo ceramic
  - S.03.07 Thickfilm paste
  - S.03.08 Special glass
  - S.03.09 Protective coating
  - S.03.10 Casting compound, resin, synthetic
  - S.03.11 Permanent magnet
  - S.03.12 Ultrasound generator
  - S.03.13 Light source
  - S.03.14 Illumination system
  - S.03.15 LED
  - S.03.16 Laser System
  - S.03.17 Optical component
  - S.03.18 Lens optics, diffractive optics, Fresnel optics, foil optics
  - S.03.19 Optical mirror, reflector
  - S.03.20 Optical fibre cable
  - S.03.21 Electrical feedthrough
  - S.03.22 ASIC, sensor-specific
  - S.03.23 Sensor interface IC
  - S.03.24 Hybrid circuit
  - S.03.25 Interface module
  - S.03.26 Communication module, wire-bound
  - S.03.27 Communication module, wireless
  - S.03.28 LCD
  - S.03.29 Mechanical process interface
  - S.03.30 Hermetically sealed housing
  - S.03.31 Connector
  - S.03.32 PCB
  - S.03.33 Turned part
  - S.03.34 Power supply
  - S.03.35 Power supply for wireless sensors
  - S.03.36 Cable (copper cable)
  - S.03.37 Function test station
  - S.03.38 Evaluation tool
  - S.03.39 Acoustic wave component
  - S.03.40 Thermometer protection tube
  - S.03.41 Gasket, seal
  - S.03.42 Actuators
    - S.03.42.01 Microactuator
    - S.03.42.02 Piezoelectric actuator
    - S.03.42.03 Magnetostrictive actuator
    - S.03.42.04 Shape memory actuator
    - S.03.42.05 Electromagnetic actuator
    - S.03.42.06 Electrostrictive actuator
    - S.03.42.07 Electrostatic actuator
    - S.03.42.08 Electrooptical actuator
    - S.03.42.09 Thermomechanical actuator
    - S.03.42.10 Thermopneumatic actuator
    - S.03.42.11 Micromotor
    - S.03.42.12 Micro-/nanopositioning, micro-/nanomanipulation
    - S.03.42.13 Mikrogear
    - S.03.42.14 Micropump
    - S.03.42.15 Microvalve
    - S.03.42.16 Further actuators, microactuators
  - S.03.43 Sample gas doser
  - S.03.44 Polarizer
  - S.03.45 Further sensor components and accessories
- S.04 Equipment for the production of sensors and actuators
  - S.04.01 Exposure equipment
  - S.04.02 Equipment for photolithography
  - S.04.03 Dosing device
  - S.04.04 Diffusion tube
  - S.04.05 Coating systems, e.g. thermal coater
  - S.04.06 Coating system
  - S.04.07 Laser scoring, cutting and trimming system
  - S.04.08 Cleaning equipment
  - S.04.09 Etching equipment
  - S.04.10 Wafer saw
  - S.04.11 Equipment for desiccation, drying; tunnel furnace
  - S.04.12 Bonding equipment
  - S.04.13 Resistance soldering / welding equipment
  - S.04.14 Lettering equipment
  - S.04.15 Clean-room equipment
  - S.04.16 Flow box
  - S.04.17 ESD equipment
  - S.04.18 Laser welding system
  - S.04.19 Further equipment for the production of sensors and actuators
  - S.04.20 Micromounting system
Measurement Technology
- M.01 Telemetry system and components
- M.02 Modeling and simulation, HiL
- M.03 Measuring equipment
  - M.03.01 Multimeter
  - M.03.02 Oscilloscope
  - M.03.03 Signal generator
  - M.03.04 Transient recorder
  - M.03.05 Data logger and radio transmitter
  - M.03.06 Modular universal measuring instrument
  - M.03.07 Combined measurement and control device
  - M.03.08 PC-based measurement system
  - M.03.09 Force-displacement measuring equipment
  - M.03.10 Power meter
  - M.03.11 Portable measuring instrument for industrial sensors
  - M.03.12 Stroboscope, strobe light
  - M.03.13 Tachometer
  - M.03.14 Further measuring equipment
  - M.03.15 Signal analyzers
    - M.03.15.01 Spectrum analyzer
    - M.03.15.02 Modal analyzer
    - M.03.15.03 NVH analyzer (Noise Vibration Harshness)
    - M.03.15.04 Optical analyzer
    - M.03.15.05 Order tracking analyzer
    - M.03.15.06 Sound level meter
    - M.03.15.07 Further signal analyzers
    - M.03.15.08 Fault analyser
  - M.03.16 Gas system threshold monitor
  - M.03.17 Thermal imaging camera
- M.04 Measuring equipment with integrated sensor
  - M.04.01 Geometric parameter
  - M.04.02 Mechanical parameter
  - M.04.03 Dynamic parameter
  - M.04.04 Thermal and caloric parameter
  - M.04.05 Atmospheric and meteorological parameter
  - M.04.06 Optical parameter
  - M.04.07 Acoustic parameter
  - M.04.08 Electrical parameter
  - M.04.09 Chemical, biological, medical parameter
  - M.04.10 Gas concentration
  - M.04.11 Image processing parameter
  - M.04.12 Electron spectrometer
  - M.04.13 Optical spectrometer
  - M.04.14 Multi gas (Ox, Tox, Ex)
  - M.04.15 Photoacoustic spectrometer, PAS
  - M.04.16 Further measuring equipment with integrated sensor
  - M.04.17 Vibration measuring device
- M.05 Measurement modules, measurement data acquisition systems
  - M.05.01 Analog signals
    - M.05.01.01 Voltage
      - M.05.01.01.01 ≤ 10 V
      - M.05.01.01.02 ≤ 100 V
      - M.05.01.01.03 ≤ 1000 V
      - M.05.01.01.04 Further analog voltage signals
      - M.05.01.01.05 Microvolts
      - M.05.01.01.06 0.5 to 4.5 V
    - M.05.01.02 Current
      - M.05.01.02.01 0 to 20 mA
      - M.05.01.02.02 4 to 20 mA
      - M.05.01.02.03 4 to 20 mA HART
      - M.05.01.02.04 Further analog current signals
  - M.05.02 Digital signals
    - M.05.02.01 TTL
    - M.05.02.02 Incremental
    - M.05.02.03 IGBT / MOSFET
    - M.05.02.04 24V digital, SSI, PWM
    - M.05.02.05 Further digital signals
  - M.05.03 Bus systems, communication systems and protocols
    - M.05.03.01 Laboratory (RS 232, RS 485, IEEE, etc.)
    - M.05.03.02 Automotive (CAN, etc.)
    - M.05.03.03 Aviation (ARINC 429, etc.)
    - M.05.03.04 Train (MVB, etc.)
    - M.05.03.05 Automation (Profibus, Interbus, Ethernet, EtherCAT, openSAFETY, etc.)
    - M.05.03.06 OPC UA
    - M.05.03.07 HART, IO-Link
    - M.05.03.08 ProfiNET, Ethernet/IP
    - M.05.03.09 Modbus
    - M.05.03.10 USB, SPI, I²C
    - M.05.03.11 M-Bus, Meter-Bus
    - M.05.03.12 SDI-12
    - M.05.03.13 Network protocols
    - M.05.03.14 Further bus systems
  - M.05.04 Measurement systems with integrated signal conditioning
    - M.05.04.01 Thermocouple
    - M.05.04.02 Resistance thermometer
    - M.05.04.03 IEPE/ICP sensors
    - M.05.04.04 Strain gauge
    - M.05.04.05 Pressure in gas/liquid
    - M.05.04.06 Linear Variable Differential Transformer, LVDT
    - M.05.04.07 Potentiometer
    - M.05.04.08 Fixed gas measurement system
    - M.05.04.09 Audio measurement system
    - M.05.04.10 Video measurement system
    - M.05.04.11 Tunable Diode Laser Spectrometer, TDLS
    - M.05.04.12 Further measurement systems with integrated signal conditioning
    - M.05.04.13 Density, liquid
    - M.05.04.14 Optical sensing interrogator
    - M.05.04.15 Thermography, thermal imaging camera system
- M.06 Software
  - M.06.01 Parametrization, visualization
  - M.06.02 Signal analysis, signal evaluation
  - M.06.03 Statistics
  - M.06.04 Database
  - M.06.05 System integration software
  - M.06.06 Programming environment
  - M.06.07 Automation software
  - M.06.08 Data acquisition, measurement value acquisition
  - M.06.09 Vibration analysis
  - M.06.10 Audio and video integration
  - M.06.11 Cloud server service
  - M.06.12 Further measurement software
  - M.06.13 Simulation
  - M.06.14 Calibration software
  - M.06.15 Thermography software
- M.07 Measurement components and accessories
  - M.07.01 Bus system and interface
  - M.07.02 Cables, connectors, accessories for digital signal transmission
  - M.07.03 Wireless signal transmission (WLAN, UMTS, telemetry, Bluetooth, etc.)
  - M.07.04 Optical signal transmission (fiber optic)
  - M.07.05 Signal filter
  - M.07.06 Multiplexer
  - M.07.07 AD/DA converter
  - M.07.08 Control component (SPS, PLC, DIO, etc.)
  - M.07.09 Controller
  - M.07.10 Data storage
  - M.07.11 Power supply voltage, power supply current
  - M.07.12 Universal display unit or operator panel
  - M.07.13 Normal
  - M.07.14 Calibrator and calibrator accessories
  - M.07.15 Paperless recorder
  - M.07.16 Further measurement components and accessories
  - M.07.17 Electronics general
  - M.07.18 Data acquisition card
  - M.07.19 Measurement amplifier
- M.08 Image processing
  - M.08.01 Image processing, general
  - M.08.02 Identity, code recognition
  - M.08.03 Object detection, object comparison
  - M.08.04 Object presence, object absence
  - M.08.05 Object measurement
  - M.08.06 Pattern recognition, pattern comparison
  - M.08.07 Spectral image processing
  - M.08.08 Motion detection
  - M.08.09 Free distance detection
  - M.08.10 Landmark detection/identification
  - M.08.11 Perspective positioning
  - M.08.12 2D-/3D-Figure analysis
  - M.08.13 Barcode reader
  - M.08.14 2D code, 2D barcode
  - M.08.15 Line camera
  - M.08.16 Compact vision system
  - M.08.17 Infrared system
  - M.08.18 DNA microarray
  - M.08.19 Further image processing parameters
- M.09 Testing equipment
  - M.09.01 Automotive testing systems
    - M.09.01.01 Automotive full-vehicle testing
      - M.09.01.01.01 Exhaust gas testing equipment or testbed
      - M.09.01.01.02 Chassis dynamometer
      - M.09.01.01.03 Acoustic testing equipment, sound measuring chamber
      - M.09.01.01.04 EMC testbed, EMC testing chamber
      - M.09.01.01.05 Road simulator
      - M.09.01.01.06 Kinematic test bed (spring tests, stiffness tests)
      - M.09.01.01.07 Brake and ABS testbed
      - M.09.01.01.08 Torsion testbed
      - M.09.01.01.09 Conveyor-line end-point testing
      - M.09.01.01.10 Climatic testbed
      - M.09.01.01.11 Wind tunnel
      - M.09.01.01.12 Vehicle operational test system
      - M.09.01.01.13 Driving testing ground
      - M.09.01.01.14 Inertial platform
      - M.09.01.01.15 Further automotive full-vehicle testing
    - M.09.01.02 Automotive components testing
      - M.09.01.02.01 Motor testing
      - M.09.01.02.02 Gear testing
      - M.09.01.02.03 Drivetrain testing (torque converter, clutch, drive shaft)
      - M.09.01.02.04 Suspension testing (axle, brake, shock absorber, steering)
      - M.09.01.02.05 Tire and wheel testing
      - M.09.01.02.06 Torque dynamometer
      - M.09.01.02.07 Axle measuring equipment
      - M.09.01.02.08 Body testing (door, lock, hood, sunroof)
      - M.09.01.02.09 Interior testing (seat and operating control elements)
      - M.09.01.02.10 Turbo charger rotation speed
      - M.09.01.02.11 Portable Emission Measurement System PEMS
      - M.09.01.02.12 Further automotive component tests
    - M.09.01.03 Vehicle safety testing
      - M.09.01.03.01 Crash test system for vehicles
      - M.09.01.03.02 Crash simulation system (crash sled)
      - M.09.01.03.03 Crash simulation, virtual
      - M.09.01.03.04 Crash test service
      - M.09.01.03.05 Test component for crash test
      - M.09.01.03.06 Airbag test equipment and chamber
      - M.09.01.03.07 Bumper test system
      - M.09.01.03.08 Pedestrian protection test system
      - M.09.01.03.09 Crash test dummy
      - M.09.01.03.10 Dummy calibration system
      - M.09.01.03.11 Dummy calibration service
      - M.09.01.03.12 Crash test data acquisition system
      - M.09.01.03.13 Crash test sensor and sensor system
      - M.09.01.03.14 Acceleration
      - M.09.01.03.15 Rotating speed sensor, angle of rotation
      - M.09.01.03.16 Force
      - M.09.01.03.17 Travel, angle
      - M.09.01.03.18 Speed, velocity
      - M.09.01.03.19 Short-time
      - M.09.01.03.20 High-speed camera
      - M.09.01.03.21 Crash test lighting system
      - M.09.01.03.22 Crash test analysis software
      - M.09.01.03.23 Vehicle safety research, systems for
      - M.09.01.03.24 Braking distance
      - M.09.01.03.25 Further systems for vehicle safety testing
    - M.09.01.04 Rail vehicle technology
      - M.09.01.04.01 Full vehicle testing system
      - M.09.01.04.02 Brake test stand
      - M.09.01.04.03 Wheelset test stand
      - M.09.01.04.04 Wheel diameter measuring system
      - M.09.01.04.05 Tire profile measuring system
      - M.09.01.04.06 Further rail vehicle technology
      - M.09.01.04.07 Door testing system
  - M.09.02 Testing systems for aerospace
    - M.09.02.01 Full structure test system
    - M.09.02.02 Landing gear test system
    - M.09.02.03 Engine test stand
    - M.09.02.04 Avionic test station
    - M.09.02.05 Fluid power test stand
    - M.09.02.06 Full structure and airfoil testing
    - M.09.02.07 Engine testing
    - M.09.02.08 Wind tunnel
    - M.09.02.09 Electrical test bed
    - M.09.02.10 Electro-optical testing system
    - M.09.02.11 Further testing systems for aerospace technology
  - M.09.03 Testing systems for electronics and electrical engineering
    - M.09.03.01 Analog measuring equipment
    - M.09.03.02 Digital measuring equipment
    - M.09.03.03 Communications measuring equipment
    - M.09.03.04 Mobile radio measuring equipment
    - M.09.03.05 Protective-measure test equipment
    - M.09.03.06 Test system
    - M.09.03.07 Software-Tool for test system
    - M.09.03.08 Peripheral equipment
    - M.09.03.09 Further testing systems for electronics and electrical engineering
  - M.09.04 Testing systems for further industries and applications
    - M.09.04.01 Hydraulic
    - M.09.04.02 Pneumatic
    - M.09.04.03 Transport and packing
    - M.09.04.04 Chemical industry
    - M.09.04.05 Medicine
    - M.09.04.06 Environmental monitoring
    - M.09.04.07 Energy technology
    - M.09.04.08 Beverage industry, food industry
    - M.09.04.09 Steel industry
    - M.09.04.10 Glass industry
    - M.09.04.11 Plastics industry
    - M.09.04.12 Ventilation
    - M.09.04.13 Further testing systems for further industries
  - M.09.05 Material testing
    - M.09.05.01 Strength and deformation by type of stress
      - M.09.05.01.01 Tensile, pressure, bending
      - M.09.05.01.02 Shearing
      - M.09.05.01.03 Torsion
      - M.09.05.01.04 Combined / multi-axial
      - M.09.05.01.05 Experimental stress analysis
      - M.09.05.01.06 Further types of stress
    - M.09.05.02 Strength and deformation behaviour by time response
      - M.09.05.02.01 Static
      - M.09.05.02.02 Quasi-static / continuous
      - M.09.05.02.03 dynamic / intermittent
      - M.09.05.02.04 dynamic / cyclical
      - M.09.05.02.05 dynamic / random
      - M.09.05.02.06 Further types of time responses
    - M.09.05.03 Strength and deformation behaviour by type of force generation
      - M.09.05.03.01 Mass force (static, dynamic)
      - M.09.05.03.02 Electromechanical
      - M.09.05.03.03 Servo-hydraulic, servo-pneumatic
      - M.09.05.03.04 Resonance stimulation
      - M.09.05.03.05 Drop energy (striking / drop-impact mechanism)
      - M.09.05.03.06 Further types of force generation
    - M.09.05.04 Hardness testing
      - M.09.05.04.01 Static hardness testing per depth measurement
      - M.09.05.04.02 Instrumented hardness determination
      - M.09.05.04.03 Dynamic hardness measuring and testing process
      - M.09.05.04.04 Further types of hardness testing
    - M.09.05.05 Further types of mechanical material testing processes
      - M.09.05.05.01 Abrasion tester, friction (coefficient) testing device
      - M.09.05.05.02 Plate pressure testing device
      - M.09.05.05.03 Internal pressure, impermeability and leak testing equipment
      - M.09.05.05.04 Under- and over-pressure chamber, pressure simulation system
      - M.09.05.05.05 Rheological testing device
      - M.09.05.05.06 Viscosimeter
      - M.09.05.05.07 Lubricant testing device, tribological testing system
      - M.09.05.05.08 Density testing device
      - M.09.05.05.09 Liquid penetration testing system
      - M.09.05.05.10 Porosity testing system
      - M.09.05.05.11 Vulcanisation testing system
      - M.09.05.05.12 Further
    - M.09.05.06 Accessories for mechanical material testing
      - M.09.05.06.01 Software
      - M.09.05.06.02 Force transducer
      - M.09.05.06.03 Multi-component transducer
      - M.09.05.06.04 Strain gauge
      - M.09.05.06.05 Transfer standard (caliper and gauge blocks)
      - M.09.05.06.06 Grip, chuck, fixture
      - M.09.05.06.07 Automatic sample feeder
      - M.09.05.06.08 Sample preparation system
      - M.09.05.06.09 Further accessories for mechanical material testing
    - M.09.05.07 Thermal and environment-simulating materials testing processes
      - M.09.05.07.01 Thermal analysis testing device
      - M.09.05.07.02 Thermal conductivity testing system
      - M.09.05.07.03 Flammability / burning behaviour testing system
      - M.09.05.07.04 Combustibility / inflammability and fire resistance testing system
      - M.09.05.07.05 High temperature testing system
      - M.09.05.07.06 Climatic test chamber (temperature, humidity, material moisture)
      - M.09.05.07.07 Corrosion testing equipment (salt, sea water, gravel)
      - M.09.05.07.08 Ozone test chamber
      - M.09.05.07.09 Freeze-thaw testing system
      - M.09.05.07.10 Moisture content testing system
      - M.09.05.07.11 Colour fastness testing system
      - M.09.05.07.12 UV light and sun simulation testing system
      - M.09.05.07.13 Dye penetration testing systems
      - M.09.05.07.14 Further thermal and environment-simulating materials testing process
  - M.09.06 Non-destructive material and component testing
    - M.09.06.01 According to testing process
      - M.09.06.01.01 Ultrasonic processes
      - M.09.06.01.02 Radioscopy / Fluoroscopy
      - M.09.06.01.03 X-ray inspection
      - M.09.06.01.04 SFM (scanning force microscopy)
      - M.09.06.01.05 Image analysis
      - M.09.06.01.06 Electromagnetic process, eddy current process
      - M.09.06.01.07 AOI (automatic optical inspection)
      - M.09.06.01.08 Optical 3-D measuring process, dimension testing system
      - M.09.06.01.09 Endoscopic testing and inspection system
      - M.09.06.01.10 Thermal imaging
      - M.09.06.01.11 Laser-acoustic testing
      - M.09.06.01.12 Further testing processes
      - M.09.06.01.13 Electron microscopy (SEM)
      - M.09.06.01.14 ROSE ionic contamination test system
      - M.09.06.01.15 Thermal shock test air/air, air/liquid, liquid/liquid
    - M.09.06.02 By technological property
      - M.09.06.02.01 Volume - error
      - M.09.06.02.02 Wall thickness
      - M.09.06.02.03 Surface - error
      - M.09.06.02.04 Surface - roughness
      - M.09.06.02.05 Surface - topography
      - M.09.06.02.06 Surface - layer thickness
      - M.09.06.02.07 Surface - deformation
      - M.09.06.02.08 Bearing - contact angle
      - M.09.06.02.09 Further application fields
      - M.09.06.02.10 Wheel bearings - pretension
      - M.09.06.02.11 Gear - slippage
    - M.09.06.03 Quality testing, calculation validation
      - M.09.06.03.01 Quality monitoring system
      - M.09.06.03.02 HALT / HASS testing
      - M.09.06.03.03 Hardware-in-the-Loop simulation, HIL
      - M.09.06.03.04 Finite Element Calculation, FEM
      - M.09.06.03.05 Kinematics simulation
      - M.09.06.03.06 Finite Difference Time Domain, FDTD
      - M.09.06.03.07 Lifetime assessment
      - M.09.06.03.08 Further quality testing and calculation validation
    - M.09.06.04 Balancing technology
      - M.09.06.04.01 Universal balancing machine (horizontal and vertical)
      - M.09.06.04.02 Statically measuring balancing machine
      - M.09.06.04.03 Alignment machine
      - M.09.06.04.04 Turbine alignment machine
      - M.09.06.04.05 Crankshaft and universal balancing system
      - M.09.06.04.06 Flywheel balancing system
      - M.09.06.04.07 Brake alignment system
      - M.09.06.04.08 Rotor balancing systems for electrical machine
      - M.09.06.04.09 Tool alignment systems for high-speed tool
      - M.09.06.04.10 Tire and rim balancing machine
      - M.09.06.04.11 Balancing and moment scale
      - M.09.06.04.12 Unbalance measuring instrument and balancing system
      - M.09.06.04.13 Further balancing machines and balancing devices
    - M.09.06.05 Vibration measuring and testing systems, vibration analysis
      - M.09.06.05.01 Electrodynamic oscillation testing system
      - M.09.06.05.02 Servohydraulic oscillation testing system
      - M.09.06.05.03 Modal stimulator
      - M.09.06.05.04 Control system for oscillation testing system
      - M.09.06.05.05 Oscillation monitoring device and system
      - M.09.06.05.06 Oscillation testing system for electrical and acoustic properties
      - M.09.06.05.07 Further oscillation measuring and testing systems, oscillation analysis
    - M.09.06.06 Measuring and testing technology for chemical material testing
      - M.09.06.06.01 Chemical durability testing system
      - M.09.06.06.02 Emission spectral analysis measuring and testing device
      - M.09.06.06.03 Fluorescent penetration inspection system and tool
      - M.09.06.06.04 Raman spectrometer
      - M.09.06.06.05 FTIR spectrometer
      - M.09.06.06.06 Further measuring and testing technology for chemical material testing
Services
- D.01 Research and Development, R&D, and knowledge transfer
  - D.01.01 General IT, software, hardware services
  - D.01.02 Development, characterization and optimization
    - D.01.02.01 Measurement techniques and processes
    - D.01.02.02 Test bed development
    - D.01.02.03 Mechatronic system engineering
    - D.01.02.04 Contract development of sensors for
      - D.01.02.04.01 Geometric parameter
      - D.01.02.04.02 Mechanical parameter
      - D.01.02.04.03 Dynamic parameter
      - D.01.02.04.04 Thermal parameter
      - D.01.02.04.05 Caloric parameter
      - D.01.02.04.06 Atmospheric parameter
      - D.01.02.04.07 Meteorological parameter
      - D.01.02.04.08 Optical parameter
      - D.01.02.04.09 Image processing parameter
      - D.01.02.04.10 Acoustical parameter
      - D.01.02.04.11 Electrical or magnetic parameter
      - D.01.02.04.12 Chemical parameter
      - D.01.02.04.13 Biological parameter
      - D.01.02.04.14 Medical parameter
      - D.01.02.04.15 Haptic parameter
      - D.01.02.04.16 Gas concentration
      - D.01.02.04.17 Mass, weight, weighting, dosing
      - D.01.02.04.18 Sensor development for further parameters
      - D.01.02.04.19 Far infrared (FIR)
    - D.01.02.05 Contract development of actuators for
      - D.01.02.05.01 Positioning application
      - D.01.02.05.02 Dynamic application (e.g. vibration damping)
      - D.01.02.05.03 Fluidic application
      - D.01.02.05.04 Thermal application
      - D.01.02.05.05 Actuators for further applications
    - D.01.02.06 Contract development of materials and components
      - D.01.02.06.01 Ceramic material
      - D.01.02.06.02 Plastic and polymers
      - D.01.02.06.03 Casting compound, resin
      - D.01.02.06.04 Semi-finished part for sensors
      - D.01.02.06.05 Substrate material
      - D.01.02.06.06 Optical component
      - D.01.02.06.07 Housing
      - D.01.02.06.08 Optical lens
      - D.01.02.06.09 Laser
      - D.01.02.06.10 3D-MID
      - D.01.02.06.11 Magnetic material
      - D.01.02.06.12 Optical diffraction grating, reticle, aperture, timing disk, siemens star, photomask
      - D.01.02.06.13 Electrical resistor
      - D.01.02.06.14 Further materials or components
    - D.01.02.07 Contract development of electronic components
      - D.01.02.07.01 Active component
      - D.01.02.07.02 Passive component
      - D.01.02.07.03 Semiconductor
      - D.01.02.07.04 Connector
      - D.01.02.07.05 Analog circuit/ASIC
      - D.01.02.07.06 Analog-to-digital converter
      - D.01.02.07.07 Digital ASIC
      - D.01.02.07.08 Mixed-signal ASIC
      - D.01.02.07.09 Electronic sensor interface
      - D.01.02.07.10 FPGA design
      - D.01.02.07.11 LF/HF transmitter/receiver
      - D.01.02.07.12 General electronic HW, SW
      - D.01.02.07.13 Machine to Machine System, M2M System
      - D.01.02.07.14 Data logger diagnostic system
      - D.01.02.07.15 Further electronic components
      - D.01.02.07.16 Amplifier
    - D.01.02.08 Contract development of technology
      - D.01.02.08.01 Thick film technology
      - D.01.02.08.02 Thin film technology
      - D.01.02.08.03 Precision mechanics
      - D.01.02.08.04 Ceramic technology
      - D.01.02.08.05 Plastics technology
      - D.01.02.08.06 Roll-to-roll (R2R) structuring
      - D.01.02.08.07 CMOS-technology or technology steps
      - D.01.02.08.08 Microstructuring of silicon
      - D.01.02.08.09 Micro Systems Technologies MST, Micro-Electro-Mechanical-Systems MEMS
      - D.01.02.08.10 Microstructuring of other material (glas, ceramic, metal, polymer)
      - D.01.02.08.11 Lithography (E-beam-, UV-, X-ray lithography)
      - D.01.02.08.12 Galvanic processing
      - D.01.02.08.13 Plasma-/surface technology
      - D.01.02.08.14 Low Temperature Cofired Ceramics, LTCC
      - D.01.02.08.15 Replication technology (Injection molding, hot embossing)
      - D.01.02.08.16 Fiber optics
      - D.01.02.08.17 Microoptics, integrated optics
      - D.01.02.08.18 Optoelectronic integrated circuit, OEIC
      - D.01.02.08.19 Assembly and packaging
      - D.01.02.08.20 Fieldbus technology, wireless, embedded controller, FPGA
      - D.01.02.08.21 Micro fluidic device
      - D.01.02.08.22 Photoresist processing
      - D.01.02.08.23 Photomask
      - D.01.02.08.24 Plasmonics
      - D.01.02.08.25 Further technologies
    - D.01.02.09 Software development, programming, algorithm
      - D.01.02.09.01 Signal processing and algorithm
      - D.01.02.09.02 Software development for measurement and testing technology
      - D.01.02.09.03 Software development, sensor specific
      - D.01.02.09.04 Kalman filter for stochastic measurement values
      - D.01.02.09.05 Algorithm for sensor data fusion
      - D.01.02.09.06 Further programming and algorithms
      - D.01.02.09.07 Automation software
      - D.01.02.09.08 Software development for cyber security
  - D.01.03 Modeling and simulation
    - D.01.03.01 Process and technology simulation
    - D.01.03.02 Component simulation, particularly with FEM
    - D.01.03.03 Analog simulation
    - D.01.03.04 Digital simulation
    - D.01.03.05 System simulation
    - D.01.03.06 Performance verification & reliability analysis
    - D.01.03.07 Optics simulation, raytracing
    - D.01.03.08 HiL Hardware-in-the-Loop simulation
    - D.01.03.09 Magnetic field simulation
    - D.01.03.10 Electric field simulation
    - D.01.03.11 Fluid simulation
    - D.01.03.12 Micro optics, diffractive optics
    - D.01.03.13 Electromagnetic field enhancement
    - D.01.03.14 Physics simulation
    - D.01.03.15 Acoustics simulation
    - D.01.03.16 Further modeling and simulation
  - D.01.04 System integration
    - D.01.04.01 Assembly and packaging
    - D.01.04.02 Packaging
    - D.01.04.03 Fluidic interconnection
    - D.01.04.04 (Micro-) handling system
    - D.01.04.05 Communication interface
    - D.01.04.06 System development embedded system
    - D.01.04.07 System development wireless sensor network
    - D.01.04.08 Mechatronic integration
    - D.01.04.09 Measurement electronics
    - D.01.04.10 Assembly and packaging for medical technology
    - D.01.04.11 Development/manufacture of Hall Sensor EOL Tester
    - D.01.04.12 Integration of sensor technology in clamping system
    - D.01.04.13 Integration of inertial sensors to determine 2D/3D location and bearing
    - D.01.04.14 Sensor integration in downhole- and subsea housings
    - D.01.04.15 Further system integration
- D.02 Contract manufacture, production
  - D.02.01 Strain gauge technology
  - D.02.02 Thick film technology
  - D.02.03 Thin film technology
  - D.02.04 Semiconductor technology
  - D.02.05 LIGA technology
  - D.02.06 CMOS technology
  - D.02.07 Ceramic technology
  - D.02.08 Plastics technology
  - D.02.09 Fiber optics
  - D.02.10 Precision mechanics
  - D.02.11 Microsystems technology MST / Micro-Electro-Mechanical-Systems MEMS
  - D.02.12 Microsensor technology
  - D.02.13 Microactuator technology
  - D.02.14 Microfluidics, micropneumatics
  - D.02.15 Micromechanics, microstructuring
  - D.02.16 Integrated optics, microoptics
  - D.02.17 Microelectronics
  - D.02.18 Hybrid technology
  - D.02.19 Assembly and packaging
  - D.02.20 Nano technology
  - D.02.21 Mechatronics
  - D.02.22 Adaptronics
  - D.02.23 Bus systems
  - D.02.24 ASIC
  - D.02.25 Contract manufacture
  - D.02.26 Laser processing
  - D.02.27 Etching technology
  - D.02.28 Galvanic processing
  - D.02.29 Bonding
  - D.02.30 Micro drilling
  - D.02.31 Micro welding
  - D.02.32 Micro gluing
  - D.02.33 Micro cutting
  - D.02.34 Molding-, micro molding technology
  - D.02.35 Housing production
  - D.02.36 Connector, cable technologies
  - D.02.37 Peripherals technology
  - D.02.38 Unit contract manufacture
  - D.02.39 Cleaning/Activating
  - D.02.40 Other services concerning sensor systems and actuators
  - D.02.41 Actuator-specific
  - D.02.42 Prototype manufacture
  - D.02.43 Electronics manufacturing service, EMS
  - D.02.44 Electron beam welding
  - D.02.45 Chemical sensors
  - D.02.46 Liquid seal
  - D.02.47 Electron beam lithography
  - D.02.48 Photo lithography and embossing
  - D.02.49 Semiconductor processing
  - D.02.50 Multilayer coating
  - D.02.51 Further contract manufacture, production
  - D.02.52 Additive manufacturing (3D printing)
  - D.02.53 Additive manufacturing (3D printing)
  - D.02.54 Parylene conformal coating
  - D.02.55 Injection moulding
  - D.02.56 Chemical, electroless metallization
  - D.02.57 3D structural electronics production
  - D.02.58 Printing
- D.03 Calibration and Testing
  - D.03.01 Accredited calibration laboratory
    - D.03.01.01 Distance
    - D.03.01.02 Electrical charge
    - D.03.01.03 Force
    - D.03.01.04 Pressure
    - D.03.01.05 Torque
    - D.03.01.06 Acceleration
    - D.03.01.07 Velocity
    - D.03.01.08 Mass flow
    - D.03.01.09 Volume flow gases
    - D.03.01.10 Flow speed
    - D.03.01.11 Temperature
    - D.03.01.12 Humidity
    - D.03.01.13 Absolute humidity, dew point
    - D.03.01.14 Acoustic parameters
    - D.03.01.15 Signal conditioning, measurement amplifiers
    - D.03.01.16 Laser power
    - D.03.01.17 Electrical parameters
    - D.03.01.18 Electrical voltage
    - D.03.01.19 Electrical resistance
    - D.03.01.20 Electric, magnetic field strength
    - D.03.01.21 Vacuum
    - D.03.01.22 Volume flow liquids
    - D.03.01.23 Further accredited calibration laboratories
  - D.03.02 Testing and calibration services
    - D.03.02.01 Acceleration sensor calibration
    - D.03.02.02 Pressure sensor calibration
    - D.03.02.03 Flow sensor calibration
    - D.03.02.04 Gas sensor calibration
    - D.03.02.05 Dynamic force sensor calibration
    - D.03.02.06 Inclination sensor and measuring instrument calibration
    - D.03.02.07 Laser power measuring instrument calibration
    - D.03.02.08 Testbed contractor
    - D.03.02.09 Vibration, shock and climatic tests
    - D.03.02.10 Environmental compatibility tests
    - D.03.02.11 EMC testing service, EMC consulting
    - D.03.02.12 Quality testing, quality assurance
    - D.03.02.13 Reliability testing, load testing
    - D.03.02.14 X-Ray inspection
    - D.03.02.15 X-Ray, 2D/3D
    - D.03.02.16 Sensors for distance, length, displacement
    - D.03.02.17 Laser acoustic material testing
    - D.03.02.18 Calibration of infrared sensors and measuring equipment
    - D.03.02.19 Flow speed sensor calibration
    - D.03.02.20 Static force sensor calibration
    - D.03.02.21 Torque sensor calibration
    - D.03.02.22 Load cell calibration
    - D.03.02.23 Temperature sensor calibration
    - D.03.02.24 Air humidity sensor calibration
    - D.03.02.25 Corrosion testing
    - D.03.02.26 Calibration on site
    - D.03.02.27 Calibration of impulse hammers
    - D.03.02.28 Microphone calibration
    - D.03.02.29 Calibration of vibration measuring instruments, amplifiers and calibrators
    - D.03.02.30 Materials analysis with X-ray fluorescence, XRF
    - D.03.02.31 Energy-dispersive X-ray spectroscopy, EDX, EDS
    - D.03.02.32 Further testing and calibration services
- D.04 General contracting services
  - D.04.01 Measuring service
  - D.04.02 Rental of measuring equipment
  - D.04.03 Electronic recycling
  - D.04.04 Automation system design
  - D.04.05 Service/maintenace
  - D.04.06 Training, continued education
  - D.04.07 Training-on-the-project
  - D.04.08 Publishing service, journal, literature
  - D.04.09 Exhibition and trade fair services
  - D.04.10 Consulting in Micro Systems Technologies, MEMS
  - D.04.11 Engineering services
  - D.04.12 Project planning
  - D.04.13 Business consulting
  - D.04.14 Consulting for marketing, advertisement, public relations, sales
  - D.04.15 Technology consulting
  - D.04.16 Consultance in financial-support programmes
  - D.04.17 Subsidy and funding consulting
  - D.04.18 Standards, norms
  - D.04.19 Further general contracting services
  - D.04.20 Repairs
  - D.04.21 Representation of interests
  - D.04.22 Studies and expert reports
  - D.04.23 Microelectronics consulting

Specific search

Minimum 3 characters.

Exhibitors + Products

Search by product group(s)

Specific search

Login