Inductive displacement transducers with M30 male thread


product news image

The very precise, inductive displacement transducers have integrated supply and evaluation electronics.
The coil system and the electronic boards are installed in a screw-in threaded housing and completely encapsulated with a plastic compound. The continuous external thread M30 x 1.5mm allows a very easy mounting of the displacement transducers.
Due to the encapsulated design the protection class IP68 is achieved. It allows applications with shock loads up to 250 g SRS (20 - 2000 Hz) and vibration loads up to 20 g rms (50 g peak).

Standard measurement displacements of 5, 10 or 15 mm are converted into standardized output signals 0(4) - 20 mA or 0 - 10 VDC with 0.1 % measurement accuracy. As operating voltage 9 - 32 VDC are to be provided.
The freely movable plunger of the standard displacement transducer can be mounted by the user in such a way that the displacement is measured without contact and thus without wear.

Different mechanical variants, such as styli with return spring and bellows, fine styli with Ø 8 mm mounting shaft or ball joints on the plunger and housing are available. The electrical connection can be made either via a plug or a waterproof cable.

Produkt-Neuheit als PDF herunterladen

Europark Fichtenhain A 13 a

47807 Krefeld


+49 2151 516259-0

+49 2151 516259-20

Halle 1 Stand 1-356

Aussteller-Details anzeigen


Benutzerkonto erstellen